Motorola DROID BIONIC XT865 Hard Reset Procedures

How to, hard reset procedures on Motorola DROID BIONIC XT865.

Here's the step by step instruction on how to Hard Reset the  Motorola DROID BIONIC XT865, to format and restore its original factory default settings.

Note: Performing a hard reset is only advisable if your Motorola DROID BIONIC XT865 experiencing a hang-up, unresponsive, frozen etc. when opening or using some application installed.
This process will result to wipe and delete all data and application you installed on the device, just make a back copy first before you may proceed.

Here's the following procedures:

Soft reset or format from the menu settings:
   1. On main home screen, select Menu
   2. Select Settings, then Privacy
   3. Select Factory Data Reset
   4. Select Reset phone
   5. Just enter the Password if prompted, then confirm by selecting Erase Everything

If the device hang-up, unresponsive or frozen, you may do a hard reset through button combination:

   1.  If your Motorola DROID BIONIC XT865 is frozen, Turn the power off., remove the battery out and put it back again.
   2. Then briefly press and hold the Power and Camera buttons
   3. When prompted message appers, release the Camera button
   4. Press and hold the Volume Down key
   5. Then it display a yellow exclamation mark
   6. Just select Factory Reset and press OK

Just wait until the reset process completed, the Motorola DROID BIONIC XT865 will then reboot.
And then it will restore back to its original factory default settings again. 

Motorola SPICE XT300 hard reset procedures

How to hard reset  Motorola SPICE XT300.

Here's the step by step instruction on how to Hard Reset the  Motorola SPICE XT300, to format and restore its original factory default settings.

Note: Performing a hard reset is only advisable if your Motorola SPICE XT300 experiencing a hang-up, unresponsive, frozen etc. when opening or using some application installed.
This process will result to wipe and delete all data and application you installed on the device, just make a back copy first before you may proceed.

Here's the following procedures:

Soft reset or format from the menu settings:
   1. On main home screen, select Menu

   2. Select Settings, then Privacy
   3. Select Factory Data Reset
   4. Select Reset phone
   5. Just enter the Password if prompted, then confirm by selecting Erase Everything

If the device hang-up, unresponsive or frozen, you may do a hard reset through button combination:
   1.  If your Motorola SPICE XT300 is frozen, Turn the power off., remove the battery out and put it back again.
   2. Then briefly press and hold the Power and Camera buttons
   3. When prompted message appers, release the Camera button
   4. Press and hold the Volume Down key
   5. Then it display a yellow exclamation mark
   6. Just select Factory Reset and press OK

Just wait until the reset process completed, the Motorola SPICE XT300 will then reboot.
And then it will restore back to its original factory default settings again. 

Motorola Q9h hard reset

To perform a hard reset,To perform a hard reset
Method 1
1. Turn the device off.
2. Press and hold the "E" and "Z" keys.
3. Press the Power button once.
4. When screen comes on, let go of "E" and "Z"
5. Press Power button once again.
6. Message that the phone has been reset.
7. Takes a few mins to reset.
OR
Method 2
To perform a hard reset, hold down the center / Navigation keys for 5 seconds while turning the device on.

master reset Motorola Q9h

To return your device to original settings: Press Start
> System Tools > Master Reset
The default master reset code is 000000 (6 zeroes).
Master reset does not reset the unlock code,
security code, and lifetime timer.
master clear
Caution: Master clear erases all information you
have entered (including contacts and calendar
events) and content you have downloaded
(including photos and sounds) stored in your
device's memory. After you erase the information,
you can't recover it.
Press Start > System Tools > Master Clear
The default master reset code is 000000 (6 zeroes).

Here's a simple tricks on how to factory reset the LG Vortex to wipe all data and restore its original factory settings Please be informed that the result of this process will delete all data stored from the LG Vortex. But this process may or may not delete data stored on the microSD memory card. Just back up all of your personal data before you may proceed. Resetting through Home Screen Settings 1. On the main home screen, select menu 2. Select Settings, then select Privacy 3. Select Factory data reset 4. Select Reset phone 5. Enter the password if prompted, then select Erase everything If the LG Vortex is frozen 1. Shut the Power Off, take the battery out and reinsert it back again 2. Hold the Home and Volume Down button 3. Press and hold the Power button until the device turns on 4. Follow the on-screen instructions to reset your device All data and any third-party applications will be wiped out from the LG Vortex. Once the reset process is complete, the phone will then reboot to its factory default state settings.

Here's a step by step instructions on how to factory reset or hard reset the Motorola DROID X SE to clear all data and restore it back to original settings.

Note this procedure will delete all data installed or stored on Motorola DROID X SE. However, this process may or may not delete data stored on the microSD memory card. Please do have a back up copy of all the personal data stored on the device.

Procedure on how to hard reset the Motorola DROID X SE.

   1. Shut down the DROID X SE by holding the power button and then selecting the Power Off
   2. Hold the X key on the keyboard and turn the power back on, keep holding down the X key until a yellow triangle icon will appear.
   3. Once the icon showed, close the slider and simultaneously press the Volume Up and Camera buttons   (you may need to do this several  times)
   4. Then a menu of choices will appear, just select  "wipe data/factory reset". You can select this option using the direction pad on the keyboard.
  5. Using the direction pad Scroll down  to the "yes" option and select it with the d-pad select key

Once the wipe is complete, the device will then reboot to its factory default state settings. All the data including third-party applications installed will be deleted from the Motorola DROID X SE. Read more...

phone tutorial-Throw in the way of OEM applications on motorola android Milestone

This technique also speed up loading Milestone (also can be used for other Android devices), who Applications krn we waste no longer loaded into the system, as we all know sometimes terload application remains in memory even though we do not use (see through the task manager)

Here I'll throw some applications on the Milestone who I never use

- Browser.apk - Replace Dolphine Browser
- Email.apk - Use Gmail enough
- Gestures.apk - ribet ...
- Maps.apk - Replace disposable Navigation Maps or download the final version in the market (with a market enabler)
- FOTA.apk - OTA Firmware Update (manual beat it, waiting for official update old)
- MediaGallery.apk - Replace the 3D Gallery
- MotAccuWeatherWidget.apk - Beautiful enough Widget
- MotoCAL.apk - unused
- MotoGAL.apk - unused

Steps:
1. Make sure the USB Debugging checked in Settings - Application - Development
2. Connect with Computer Milestone
3. Open cmd, go to the Tools directory of the Android SDK
4. type:
adb shell
su
mount-o remount, rw / dev/mtd/mtdblock6 / system
mkdir / sdcard / backupApp /
cp / system / app / Browser.apk / sdcard / backupApp /
cp / system / app / Email.apk / sdcard / backupApp /
cp / System / app / Gestures.apk / sdcard / backupApp /
cp / system / app / Maps.apk / sdcard / backupApp /
cp / system / app / FOTA.apk / sdcard / backupApp /
cp / system / app / MediaGallery.apk / sdcard / backupApp /
cp / system / app / MotAccuWeatherWidget.apk / sdcard / backupApp /
cp / system / app / MotoCAL.apk / sdcard / backupApp /
cp / system / app / MotoGAL.apk / sdcard / backupApp /
cd / system / app
rm Browser.apk
rm Email.apk
rm Gestures.apk
rm Maps.apk
rm FOTA.apk
rm MediaGallery.apk
rm MotAccuWeatherWidget.apk
rm MotoCAL.apk
rm MotoGAL.apk
uninstall com.google.android.apps.maps pm
sync
mount-o remount, ro / dev/mtd/mtdblock6 / system

5. Press Ctrl + C to exit from adb shell
6. Done, can go with installing a replacement app like Maps Nav, Dolphine Browser and 3D Gallery

The mode can also be done to dispose of other applications, but REMEMBER! there are some applications in / system / app who desperately needed by the Android System, so the first function and dependecy know that we want to dispose of the app .. and always backup! app that we want to move the waste to the sdcard, if we can restore chaos

ways to improve insert sim motorola L6 & L7

Insert the SIM in Motorola extremely rare, but precisely because it rarely happens will be very difficult solution we can, because rarely are experiencing this, therefore I provide for you who need this jumper trick

repair solutions for motorola v8 not charging

below is a tutorial on repairing damage to the mobile phone motorola V8 to the problem can not charge
 motorola mobile phone on the market although not as much like a nokia or sony ericsson, but you must remember that Motorola is also much liked by some circles, but for certain series and not all series motorola,

OK, I just wanted to explain to you how to repair damage to the motorola phone can not charge,

before we have to remember that any damage to the phone, whether it is nokia, motorola, sony ericsson, and others, in broad outline is divided into 2 of damage to hardware and software,but this time I discuss is to damage the hardware repair motorola.

steps you should do motorola mobile phone V8 Juka damage can not charge is shown below:
remove F501
remove V961
remove C942
The second and final step foot jumper F501, like the picture below:

Read more... 

Motorola V3 Invalid Battery

Motorola v3 invalid battery solution 100%

Motorola v3 Test Point

Motorola Flip Out Hard Reset

Motorola Flip Out Hard Reset

Note: Back up all of your personal data before you proceed. All data will be deleted on your Motorola FlipOut by doing this procedure. However, this process will NOT delete data stored on the micro-SD card.

To Hard Reset Motorola FlipOut.
1. Turn the power off. If your Motorola FLIPOUT is frozen, pull the battery out and reinsert it
2. Press and hold the Power and Camera buttons
3. Release the Camera button when prompted
4. Press and hold the Volume Down key
5. A yellow exclamation will appear on the display
6. Select the Wipe data/factory reset (Alt + W) option
If you selected YES, all data including third-party applications will be deleted .
Once the wipe is complete, the phone will reboot to its factory fresh state.
Done, your Motorola FlipOut Reset back from its original status.

Motorola BRAVO hard reset, wipe, clear and restore data to original settings

 

     Here's a step instructions on how to factory reset the Motorola BRAVO to wipe and clear all data and restore its original settings

Please note the result of this process will delete all data installed from the Motorola BRAVO This process may or may not delete data stored on the microSD memory card.
Do a back up all personal and important data stored in the device.

Wipe and Factory Reset through MENU Settings

   1. From the main Home Screen, Select Menu
   2. Select Settings, then select Privacy
   3. Select Factory Data Reset
   4. Select Reset Phone
   5. Enter the Password if prompted, then Select Erase Everything to confirm

If the Motorola BRAVO is Frozen, Do a Hard Reset through button combination

   1. Turn the power off. If the Motorola BRAVO is frozen, take the battery out and reinsert it back again
   2. Press and hold the Power and Camera buttons
   3. Release the Camera button when prompted
   4. Press and hold the Volume Down key
   5. A yellow  exclamation will then appear on the LCD display
   6. Select the Wipe data/factory reset (Alt + W) option

 Once the wipe is complete, the phone will reboot to its factory fresh default settings. All the data installed including third-party application on Motorola BRAVO will be wipe out. You may need to install it back again.

Motorola DROID X SE Hard Reset Instructions

Here's a step by step instructions on how to factory reset or hard reset the Motorola DROID X SE to clear all data and restore it back to original settings.

Note this procedure will delete all data installed or stored on Motorola DROID X SE. However, this process may or may not delete data stored on the microSD memory card. Please do have a back up copy of all the personal data stored on the device.

Procedure on how to hard reset the Motorola DROID X SE.

   1. Shut down the DROID X SE by holding the power button and then selecting the Power Off
   2. Hold the X key on the keyboard and turn the power back on, keep holding down the X key until a yellow triangle icon will appear.
   3. Once the icon showed, close the slider and simultaneously press the Volume Up and Camera buttons   (you may need to do this several  times)
   4. Then a menu of choices will appear, just select  "wipe data/factory reset". You can select this option using the direction pad on the keyboard.
  5. Using the direction pad Scroll down  to the "yes" option and select it with the d-pad select key

Once the wipe is complete, the device will then reboot to its factory default state settings. All the data including third-party applications installed will be deleted from the Motorola DROID X SE.

Motorola DROID Pro hard reset to factory settings procedures

Here's  how to hard reset the Motorola DROID Pro with step by step instructions.
This steps will factory reset the Motorola DROID Pro to clear all data and restore its original settings

Note the result of this procedure will delete all data from the Motorola DROID Pro . This process may or may not delete data stored on the microSD memory card. Do save a back up all of your personal data before proceeding.

Try to reset the device on Menu Settings
   1. From the main Home Screen, select Menu
   2. select Settings, then Privacy
   3. Select Factory Data Reset
   4. Select Reset Phone
   5. Enter the Password if prompted, then tap Erase everything to confirm

Id the device handset is frozen, do a hard reset through key combination
   1. Power down the DROID Pro by holding the power button and then selecting Power Off
   2. Hold the X key on the keyboard and turn the power back on, keep holding down the X key until a yellow triangle icon will appear
   3. Now close the slider and hold down the Volume Up button, then press the Camera button while still holding volume up
   4. A menu will then appear then use the direction pad on they keyboard to select the "wipe data/factory reset" option
   5. Scroll down using the direction pad to the "yes" option and select it with the d-pad select key

Once the wipe is complete, the phone will reboot to its factory fresh state.All data including third-party applications will be deleted from the Motorola DROID Pro. You need to install back third-party application again.

Motorola CITRUS hard reset wipe and restore to factory settings procedures

Here's an instructions on how to factory reset the Motorola CITRUS  to clear all data and restore its original factory settings again.

Note this procedure will be delete all data installed from the Motorola CITRUS. This process may or may not delete data stored on the microSD memory card. Please do a back first first before you may proceed.

Do try this when thte MENU settings is accessible and the device is not Frozen.

   1. On the main Home Screen, select Menu
   2. Select Settings, then select Privacy
   3. Select Factory Data Reset
   4. Select Reset Phone
   5. Enter the Password if prompted, then select Erase Everything to confirm

If the above steps doesn't work, or if the phone device is frozen, do a hard reset through button key combination.

   1. Turn the Power Off. If your Motorola CITRUS is frozen, take the battery out and reinsert it again
   2. Press and hold the Power and Camera buttons
   3. Release the Camera button when prompted
   4. Press and hold the Volume Down key
   5. A Yellow Exclamation will then appear on the LCD display
   6. Select the Wipe data/factory reset (Alt + W) option

Once the wipe out is complete,all the data including third-party applications will be deleted from the Motorola CITRUS. the phone will then reboot to its factory fresh default state settings.

Motorola FLIPSIDE hard reset restore data to factory default settings instruction

This is an instruction  to factory reset the Motorola FLIPSIDE to clear all data and restore its original settings
Here's how to hard reset the Motorola FLIPSIDE with step by step instructions.

Note: The result of this procedure will delete all data from the Motorola FLIPSIDE . This process may or may not delete data stored on the microSD memory card. Backing up all of your personal data before proceeding is highly recommended.

Do try this on the Menu Settings,

   1. On the Main Home Screen, select Menu
   2. Select Settings, then select Privacy
   3. Select Factory Data Reset
   4. Select Reset Phone
   5. Enter the Password if prompted, then select Erase Everything

Do a hard reset through button combination if the above procedures doesn't work or if the phone handset is frozen.

   1. Turn the power off. If the Motorola FLIPSIDE is frozen, take the battery out and reinsert it again
   2. Press and hold the Power and Camera buttons
   3. Release the Camera button when prompted
   4. Press and hold the Volume Down key
   5. Then a yellow exclamation will appear on the display
   6. Select the Wipe data/factory reset (Alt + W) option

Once the wipe is finish, the phone will then reboot to its factory default state settings. All data including third-party applications will be deleted from the Motorola FLIPSIDE, you may need to install back back up application.