Saturday, January 1, 2011

hardreset procedures and soft reset garmin iQue 3000

,
Resetting Your iQue

You may charge to accomplish a displace if your handheld no best responds to stylus curtains or button presses. A bendable displace allows your handheld to get a beginning start, agnate to rebooting a PC. All annal and entries are retained afterwards a bendable reset

To perform a soft reset:
Use the stylus to press and release the Reset button inside the hole on the back of the handheld


A hard reset erases all records and entries stored in your handheld. Never perform a hard reset unless a soft reset does not correct
your problem. When you perform your next HotSync® operation, you can restore any data that you previously synchronized to your
computer.

To perform a hard reset:

1. Press the Reset button as described above.
2. Immediately after you release the Reset button, press and hold the Power button until you see the Palm Powered™ logo. Then release
the Power button.
3. When a message appears on the screen warning that all data stored on the handheld is about to be erased, do one of the following:
• Complete the hard reset by pressing the upper half of the scroll button on the front of the handheld. The Digitizer screen appears.
• Press any other button to perform a soft reset.
NOTE: When you perform a hard reset, the current date and time are retained. Formats, preferences, and other settings
are restored to their factory default settings.

0 comments to “hardreset procedures and soft reset garmin iQue 3000”

Post a Comment

 

Mr.Mobile Copyright © 2011 | Template design by O Pregador | Powered by Blogger Templates